Products
IRRIGATION CONTROLLERS
FILTERS BACKFLUSHING CONTROLLERS
SPECIAL PURPOSE CONTROLLERS
FROST 1 DC (Discontinued)
FOGGER 2+5 AC
FERTILIZERS INJECTION CONTROL
FERTMASTER
FERTOMAT
SMART FERTILIZER PUMP
MULTIWIRED TO SINGLE CABLE OR RADIO RTU BUS-SYSTEMS
ORACLE
TENSIOMARKER
WATER DISTRIBUTION CONTROL SYSTEM

FERTMASTER

Accurate EC and pH control has become a major factor of modern nutrition systems. Soil-less cultures and even open field farming nowadays require a good control of the electro conductivity and the acidity of the irrigated water, that's what the FERTMASTER was designed for.

 It is a highly efficient tool capable of handling up to 6 injectors, 1 booster pump, 1 main valve/ water pump which alternatively can be replaced by an agitator. The system can read 1 water meter 6 fertilizer meters as digital inputs and 1 EC, 1 pH analogue sensors.
  • The system is available in two forms
In the stand-alone form, the user defines formulas containing the desired combinations and the desired concentrations of the fertilizers; the selection of the actual formula is made by selection contacts, which can be activated manually, or by an irrigation controller if such a controller is in use.
 
In the second form, the unit functions as a subsidiary of the DREAM irrigation controller. In this case, a single DREAM may control several FERTMASTER units loading them with the requirements through serial communication and receiving back a full picture of the process on a real time basis.
  • Software tools
The state of the art software tools simplify the process of setting up and adjusting the nutrition system. Including tools for automatic calibration and measuring of important system parameters such as the actual flow of the injectors and the control system latency. The system latency expresses the delay between injection and sensing of the results by the sensors as it happens in the specific system.
  • Safety and protection

The injection process is safely guarded by the protection mechanisms, never allowing the concentration of the fertilizers to exceed the predefined limits, and if the desired EC or pH can not be maintained within the permitted limits the appropriate preventive steps are taken.

  • Fast and smooth convergence

In order to reach a fast and accurate convergence to the desired set-points each new process takes into consideration the results of the last time of activation of the specific formula.

  • Flexible injectors function setting

Each of the injectors in use can be set either for EC controlled injection, for pH controlled injection or for proportional injection of nutrients independent of the EC and pH control. In the last option the amount injected can be limited according to user definition.

  • PC software tools

Optionally the unit may be connected by serial communication to a PC running a special software that enables full programming and process monitoring through the PC, The whole process can be inspected on a graphical display showing the actual values and the average values of the EC and pH moment by moment. These values are also recorder and can later be redisplayed in order to analyze the process behaviour.

  • Optional outputs:
    • Up to 6 fertilizer injectors
    • 1 booster pump
    • 1 main-valve/ water pump
    • 1 agitator in place of the main-valve
    • 3 alarm outputs (in stand alone mode)
    • All outputs are 24v AC up to 10 watt
  • Dry contact inputs:
    • Up to 6 fertilizer meters
    • Optional 1 water meter
    • 8 selection contacts (in stand alone mode)
  • Analogue inputs:
    • 1 EC sensor
    • 1 ph sensor
    • 1 PT100 temperature sensor

PDF Download – Brochure: